Crawler Crusher
Track crusher

News

Your position:Home > news > The vibrating force of the Screening Plants should be under

The vibrating force of the Screening Plants should be under

Posted:11-08-2012

The vibrating force of the Screening Plants should be under control

 

The vibrating force of the Screening Plants should be under control in a scientific and reasonable way in the production. Welcome to contact YIFAN for professional and comprehensive information and service.

Vibrating motor, the source of the vibrating force to the Screening Plants, should be of advantages such as reasonable design, compact layout, high vibrating efficiency, easy and convenient installation and adjustment, etc. The vibrating motor of the Screening Plants serves mainly due to its working frequency, its maximum vibrating force, and its effective power, etc. The rotating speed of the motor of the Screening Plants in production should be consistent with the working frequency, the maximum vibrating force should be within the compound force of the selected motor, and the power of the motor should conform to the working frequency and the maximum force force requirement.

The vibrating force affects the productivity of the Screening Plants directly. Specifically, the more powerful the force is, the more intensified the vibration is. Consequently, the sieve puts a larger force to the material, and the material moves faster with a higher productivity and less blocking. In addition, if the vibrating force is over small, the material on the Screening Plants will suffer poor passing ratio and poor crushing ratio. On the other hand, if the vibrating force of the Screening Plants is over large, the abrasion to the vibrating blocks on the two ends of the motor rotating shaft will increase, and the motor will get damaged easily since it is rotating fast. The vibrating force of the Screening Plants derives from the inertial centrifugal force from the rotating eccentric blocks at a high speed, so the vibrating force of the Screening Plants will be adjusted if the eccentric distance is changed with the consequently changed amplitude.